Ballantyne Concrete ContractorServing the Charlotte MetroDriveways, Patios, Foundations
Local Concrete Charlotte is one of Ballantyne NC's most reputable concrete contractors — real craftsmanship on every pour. Driveways, patios, stamped concrete, sidewalks, garage floors, foundations, pool decks, and commercial pads — quality craftsmanship on every project. Straightforward pricing, on-time crews, dependable service on every job.
What are we building?
Pick the closest match — we'll get specifics on the call.
Recent Ballantyne Concrete Projects
Real customer jobs we've poured. Swipe through and picture yours next.
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
Concrete
Ballantyne Job
(980) 489-9193
Pay on Completion
You take zero financial risk on residential work. If we don't pour your concrete, you don't pay us — period.
We never ask for money upfront — not for materials, not for permits, not for anything.
No payment milestones during the job. You pay one time, after the work is done.
Your driveway, patio, or slab has to be in the ground and finished before you owe a dime.
Ballantyne Concrete Contractor Services
Get driveway quotes in Ballantyne, patio quotes in Ballantyne, or stamped concrete quotes in Ballantyne — free written estimate back in 24 hours. Every pour is backed by high-strength concrete and commercial-grade reinforcement.
How much does concrete cost in Ballantyne, NC?
Concrete work in Ballantyne runs $10 to $12 per square foot for broom-finish flatwork and $15 to $17 per square foot for stamped decorative finishes. A standard two-car driveway (about 600 square feet) lands around $6,000 to $7,200 broom-finished. Every quote is a flat, all-in price given after an on-site walk-through, and you pay nothing until the work is complete.
| Service | Typical rate | Project minimum |
|---|---|---|
| Broom-finish concrete (driveways, patios, sidewalks) | $10–$12 / sq ft | $4,150 |
| Stamped or decorative concrete | $15–$17 / sq ft | $5,800 |
| Monolithic slab (garages, sheds, additions) | $16 / sq ft | $5,500 |
| Tear-out and haul-off of old concrete | +$2 / sq ft | $1,500 |
| Structural rebar reinforcement | $2 / sq ft | $400 |
| Decorative sealer | $4 / sq ft | $2,000 |
| Concrete steps | $800 per step | 5 steps |
Bottom line: budget $4,150 minimum for any broom-finish project in Ballantyne and $5,800 minimum for stamped work. Color additives, extra thickness, and drainage work add to the base rate — the on-site estimate covers all of it in one number. No deposit required — pay on completion after the pour.
Is concrete better than asphalt or pavers in Ballantyne?
For most Ballantyne homeowners, yes. Concrete costs more than asphalt up front ($10–$12 vs $7–$13 per square foot) but lasts roughly twice as long with a fraction of the maintenance. Pavers match concrete on lifespan but cost $15–$30 per square foot installed. Here is the honest comparison:
| Concrete | Asphalt | Pavers | Gravel | |
|---|---|---|---|---|
| Installed cost (per sq ft) | $10–$12 broom finish; $15–$17 stamped | $7–$13 | $15–$30 | $1–$3 |
| Typical lifespan | 30–50+ years | 15–20 years | 25–50 years | Indefinite, with constant upkeep |
| Maintenance | Minimal — occasional joint check; reseal only decorative finishes | Sealcoat every 3–5 years; patch cracks | Re-sand joints; pull weeds; reset settled units | Regrade and top up yearly; rake ruts |
| NC summer heat | Stays rigid; light color runs cooler | Softens in 90°+ heat; can rut and scuff | Handles heat well | Dust in dry spells |
| Resale impression | Clean, permanent, appraiser-friendly | Neutral; reads as budget in NC neighborhoods | Premium look at a premium price | Reads as unfinished on most residential lots |
| Best for | Driveways, patios, pool decks, sidewalks, slabs | Long rural driveways where budget rules | Small accent areas, walkways | Temporary or farm access |
One honest limitation: if you need 500+ feet of rural driveway paved on a tight budget, asphalt or gravel wins on day-one cost. For a standard Ballantyne residential lot, concrete’s 30–50 year lifespan makes it the cheapest option per year of service.
Ballantyne Homeowner Reviews
"Over 7 companies couldn't do the job and could not handle the scope of work, but they could and did an amazing job."
"They did it spot on! That was absolutely perfect to the specifications."
"Right from the beginning they answered my questions. It was an amazing experience."
Concrete Contractor Construction Portfolio
See the transformation. Drag the slider to reveal the restoration precision of our commercial and residential projects.
Finishing Touches in Motion
Watch our crew bring precision and artistry to the final stages of a premium concrete installation.
Driveway
Full residential replacement
Driveway
Driveway revamp
Stamped Pool Deck
Total demolition and replace
Patio Replacement
Old slab out, new finished slab in
Stamped Concrete Landing
Custom stamped finish + edge tie-in
Driveway Replacement
Tear out + fresh pour
Ballantyne — Replacements We've Poured
Drag the slider on each pair to see the same slab before demo and after we poured the replacement. Every project shown is a real Ballantyne-area customer job — no stock imagery.
Backyard Patio
Full tear-out, new pour with brick-border detail
Stamped Pool Deck
Weathered deck replaced with textured stamped pour
Front Porch & Steps
New entry pad plus poured steps to the door
Professional Concrete Contractor Standards
Our rigorous 18-step installation protocol ensures precision at every stage, from site protection and custom mix design to the final expert finish.
Site Walk & Written Quote
We drive to your Ballantyne address, measure everything with a laser, note the tear-out volume and the truck access route, and email a fixed all-in price inside one business day. No sales-office visit required.
Booking the Pour Window
We match crew and pump-truck availability against the Charlotte-metro weather forecast, then lock a date. If the Ballantyne radar shows a system inside your pour window, we tell you 48 hours in advance and reschedule the whole crew.
Mix Design to Match the Day
The Piedmont summer humidity and winter cold snap both change what the mix needs. We call the plant the day before your Ballantyne pour with the actual air-temp forecast and adjust slump, retarder, and air-entrainment before the truck loads.
Site Access + Property Protection
Before the crew starts, we lay 3/4-inch plywood over any lawn the pump line crosses, tarp landscaping in the pour zone, and confirm the Ballantyne truck route with the driver. Damage is what your neighbors are watching for — we don't cause any.
Demo of the Existing Slab
Old Ballantyne slab comes out in tracked pieces — hydraulic breaker for anything under 6 inches, saw-cut and pry for anything reinforced. Debris hauled off-site the same day. No pile of broken concrete sitting in your yard overnight.
Grading + Forming to Spec
Every Ballantyne pour gets 4-6 inches of #57 crushed stone base compacted in two lifts, laser-graded to slope 1/8-inch per foot minimum away from the house. Forms are 2x lumber, doubled at corners, staked every 32 inches for straight edges.
Real Rebar, Never Wire Mesh
#4 structural rebar tied at 18-inch on-center in a grid pattern, held off the subgrade by proper chairs so it lands in the middle of the slab where it does work. In Ballantyne's clay-swell environment, wire mesh doesn't cut it — we've replaced too many wire-mesh slabs to keep using it.
Pre-Pour Walkthrough
Right before the truck arrives, we walk the Ballantyne site with you — form heights confirmed, rebar count photographed, drainage slope re-shot with the laser. If anything looks off, this is where it gets fixed. Once concrete is placed, changes cost real money.
Slump Test at the Chute
First cubic yard off every truck gets a slump-cone test at the Ballantyne site — if the concrete is wetter or drier than the mix ticket says, we send the truck back rather than compromise the pour. Non-negotiable step.
Placement Without Cold Joints
Concrete gets placed continuously across the Ballantyne slab section — pump line moves in one direction, screeded to grade in real time behind the pump. No stopping mid-slab, no letting an edge stiffen before the next batch hits it.
Bull-Float to Close the Surface
Once placement finishes, the bull-float pushes the aggregate down and pulls the cream up. For Ballantyne broom-finish work this is the first pass that closes surface porosity — it determines whether the slab reads flat when the sun hits it low in December.
Edging + Control-Joint Cutting
Rounded edges hand-tooled for durability, then we saw-cut control joints inside 4-8 hours of finishing — the Ballantyne clay-swell window means late joints crack the field. Joints are cut at slab-thickness in inches equals feet apart, aligned with corners and columns.
Fresno Trowel to Design Finish
A long-handled Fresno trowel closes the surface a second time and pulls it flat. This is where a Ballantyne slab either reads professional or reads DIY — the Fresno pass sets the final tone before any texture goes on.
Broom, Stamp, or Aggregate Finish
Standard Ballantyne broom-finish drags in one direction perpendicular to traffic. Stamped work gets the pattern pressed while the concrete is still workable. Exposed aggregate gets a retarder + wash-off sequence timed against the day's evaporation rate.
Form Removal + Edge Cleanup
Forms come off the Ballantyne slab at 24 hours minimum — earlier and you risk edge damage; later and the lumber sticks. We chip any concrete flash off the edge, tool a final chamfer, and haul the forms off-site the same day.
On-Site Walkthrough With You
The Ballantyne homeowner walks the finished slab with the foreman. Anything that reads as a defect — high spot, joint width, finish variation — gets flagged and addressed before we leave. Invoice comes AFTER this walkthrough, never before.
Cure-Time Guide + Care Instructions
You get a printed cure-time sheet for your Ballantyne pour: 24 hours foot traffic, 7 days passenger cars, 28 days heavy vehicles. Plus written no-rock-salt guidance for the first winter and a re-seal recommendation for stamped surfaces.
Job Closed, Site Restored
Final debris haul-off, site left cleaner than we found it. Written care warranty emailed to you. That's when a Ballantyne pour is finished — not before the walkthrough, not before the cleanup, not before you say the slab meets what we quoted.
Find Us in Ballantyne, NC
Visit the location nearest you or explore the area we serve.
Nearest Location
Local Concrete Charlotte — nearest to Ballantyne, NC
9870 Rea Rd, Charlotte, NC 28277
Read reviews on GoogleServing Ballantyne, NC
Our service area in Ballantyne
Find Your City
Click any city on the map to see local pricing, photos, and reviews from your neighborhood.
Concrete Contractor Serving Ballantyne, NC
Ballantyne sits at the southern tip of Mecklenburg County — a master-planned district built out in the 90s and 2000s around the Ballantyne Corporate Park, Ballantyne Country Club, and a homeowner base that expects architectural review for anything visible from the street. Most of what we pour here is 15-25 year old first-generation replacement work: driveways that were formed with the wrong slope by production builders and have failed early, patio expansions in Cameron Wood and Ballantyne West, and pool decks where the original brick veneer has heaved off a shifting subgrade. Every Ballantyne front-yard pour goes through the neighborhood's ARC packet before we schedule the tear-out.
Ballantyne Neighborhoods We Serve
We Know Ballantyne
Our crews pour concrete within minutes of Ballantyne Corporate Park, Ballantyne Country Club, Ballantyne Village, The Amphitheater at Ballantyne and Blakeney Shopping Center. When you call, you are talking to people who drive the same roads and know which Ballantyne neighborhoods sit on fill dirt, which have strict HOAs, and where the county draws the line on right-of-way work.
Why Local Knowledge Matters in Ballantyne
Ballantyne Country Club and Piper Glen both require ARC approval on any front-yard concrete change with 3-4 weeks turnaround. We prep the CAD drawings and material samples in-house so the packet lands complete on the first submission.
- •Understanding Ballantyne's soil conditions and drainage requirements
- •Familiarity with Ballantyne building codes and permit processes
- •Experience with HOA requirements in Ballantyne communities
- •Knowledge of North Carolina's freeze-thaw cycles affecting Ballantyne
Popular Concrete Services in Ballantyne
Explore the most requested projects in Ballantyne, NC. Each page includes photos, pricing guidance, and what to expect during your install.
Also Serving Nearby Cities
We serve Ballantyne, NC and surrounding communities — local crews, local knowledge, local accountability.
Concrete Contractor FAQ
Get answers to the most common questions about concrete installation, costs, and maintenance.
Ask a QuestionDoes Ballantyne Country Club require ARC approval for a driveway replacement?
Yes — any visible-from-street work in Ballantyne Country Club requires an ARC submittal with CAD drawings, material samples, and color spec. Turnaround is 3-4 weeks. We prep the packet in-house because Ballantyne's ARC has a very specific submittal format and a lot of contractors get denied on the first pass for missing details. First submission goes through most of the time when we file.
Why do so many Ballantyne driveways crack early?
Most Ballantyne driveways were poured by production builders in 1998-2010 with a 3-inch slab, minimal rebar, and drainage sloped toward the garage instead of away from it. On the rolling 4-8% Ballantyne grades that combination fails inside 15-20 years. Our replacement spec is a 4-inch slab over 4-6 inches of compacted #57 stone with #4 rebar on a 24-inch grid, drainage re-formed away from the garage. Doubles the useful life.
Can you pour a pool deck resurface in Piper Glen?
Yes. Piper Glen pool decks from the original 2000s builds are prime candidates for a decorative overlay or full tear-out and stamped replacement. We match the color and pattern to the existing patio hardscape and file the ARC packet with the finish sample. Most Piper Glen decks we do are travertine-look stamped over a 4-inch reinforced slab.